GREUBEL FORSEY TOURBILLON CARDAN - NOVEMBER 2023 NEWS article hero image

GREUBEL FORSEY TOURBILLON CARDAN - NOVEMBER 2023 NEWS

Greubel Forsey unveils its 8th Fundamental Invention: the Tourbillon Cardan

For many years, Greubel Forsey has been working on the development of a new type of tourbillon. Over the past three years, this tourbillon has transitioned from concept to reality and is now unveiled as the 8th Fundamental Invention of the Atelier. To reach a new level of chronometric precision, the Tourbillon Cardan is based on three pillars: a rapid rotating tourbillon, a revolving 30° inclined plane and two constantly tilting rings.

An unprecedented tourbillon

The Tourbillon Cardan is designed to reach new heights of chronometric precision. It combines three principles. The first: the tourbillon. The mechanism patented by Abraham-Louis Breguet in 1801 was designed to compensate for the differences in rate, in vertical positions. For Greubel Forsey, this was not the end, but the very beginning.

While most tourbillons have a revolution of 60 seconds, that of the 8th Fundamental Invention is almost four times faster. Just 16 seconds. This is the fastest yet for a Greubel Forsey tourbillon. It moves through more positions in less time, and therefore offers much a higher average performance.

Greubel Forsey BTS Design Tourbillon Cardan

What's more, this tourbillon incorporates, for the very first time, the large balance wheel designed, developed and made in-house by Greubel Forsey. It benefits from the exemplary balance of its masses, its large size (12.6 mm) and its optimised oscillations. Its high inertia also makes it less sensitive to shocks and variations in speed.

Second principle: the 30° angle. The tourbillon, as it was conceived over two centuries ago, was designed for pocket watches worn vertically. For a wristwatch, its design needed to be totally rethought, optimised for the positions adopted in everyday 21st century life.

Tourbillon Cardan

Third principle: this 30° high-speed tourbillon is guided by two mobile rings, linked by two 90° axes. In 48 seconds, they tilt backwards and forwards. This construction may seem reminiscent of gimbals, but is very different from a traditional gimbal where the two rings are free to move and their job is to keep the object they contain horizontal. In the Tourbillon Cardan, the tilt of the rings is controlled (+30° to -30° range), while the degree of inclination of the tourbillon is inclined (also 30°) and never varies, offering a better ratio of angular velocity to chronometric performance.

Greubel Forsey Tourbillon Cardan

Chronometric power reserve

The Tourbillon Cardan has four barrels. This is a remarkable construction at Greubel Forsey (occurring just once in 20 years). They are coaxially stacked, with a slipping mainspring to prevent excess tension during winding. They offer 80 hours of chronometric power reserve. 

Inside Tourbillon Cardan

A new kind of aesthetic

As the tourbillon cannot be held in place by a fixed upper bridge, this function is performed by the two arched cardan rings. Without adopting the traditional construction, Greubel Forsey's 8th Fundamental Invention creates a new type of tourbillon with a flying appearance, which is both original and patented. A seemingly complex construction but with a very small number of components, it offers an open, airy aesthetic that leaves the eye free to admire its kinematics.

Greubel Forsey Tourbillon Cardan

100% hand-finished

Some components of the Tourbillon Cardan require up to three days for hand finishing alone. A number of unique finishes have been developed specifically for this timepiece. Among them, the movement plates are in frosted nickel silver, with polished bevels and straight grained flanks while a titanium mainplate presents a large polished flank as a backdrop to the cardan. Even more particular: the upper bridge of the tourbillon cage is made of frosted titanium with straight grained flanks and polished bevels, above and below. Finally, the arch is barrel-polished. It takes more than 30 hours to finish this single component.

Tourbillon Cardan

The cardan’s rings are matt finished, with polished bevels and straight grained flanks, while the lower plate is frosted by hand, a task that requires a particularly special expertise from the Atelier Manufacture. Finally, there are two dials (hours & minutes and seconds), one circular grained with polished flanks and a very large mirror finish angle, the other with a polished exterior flank.

Greubel Forsey has also developed a high domed sapphire crystal for this piece. It houses the full height of the tourbillon and cardan system, offering a highly architectural technical vision. The view is completely unobstructed over the balance wheel measuring 12.6 mm in diameter. You can admire the majestic swaying of the two cardan rings into which it fits.

Tourbillon Cardan Watch Front

A maximum of 11 pieces per year

The Tourbillon Cardan will be available in a 45.5 mm titanium case. This metal was chosen for its modernity and lightness, in keeping with the airy aesthetic of the Cardan tourbillon. Greubel Forsey plans to build just 55 pieces of the calibre over the next 5 years.

Greubel Forsey Tourbillon Cardan

Enquire Today

At J Farren-Price, we are a proud retailer of Greubel Forsey's exceptional inventions. Enquire with us today to purchase one of these limited edition Tourbillon Cardan masterpieces.

Alternatively, you can visit us in-store at 80 Castlereagh Street Sydney, and speak to our professional sales team. Open Monday - Saturday. 

You May Also Like